Welcome to the guide on the Designer Dashboard in BeamUp. This guide will walk you through the process of removing or adding devices in the BeamUp Designer application.

Go to design.beamup.ai

Sometimes when facilities are digitized, not all security devices are added to the design or the wrong devices are placed. This can be because no security drawings are available or they were not up to date.

If a device has been incorrectly assigned, simply right click on the device to remove it. It will still be available to you in the Installation Reports in the left hand panel for future use.

If no device has been added, BeamUp allows you to select devices that have been generated from your system reports and add them directly to the design. First, identify a location that should have additional security devices.

By selecting a room the right hand panel will show you the current room attributes and devices.

To select devices to add to the design, open the Installation Reports from the left hand panel.

Select the security device you wish to add to the location.

and drag it into place.

Now you will see in the right hand panel the device details that have been added to the location.

This guide covered the steps needed to remove a device from a design or add a device using the system installation report in Beamup. This feature can be used for many device types including access readers, cameras, motion detectors or door contacts.

Powered by guidde

​